Introduction – Creality Ender 3 Glass Bed Upgraded Review
Welcome to my Creality Ender 3 Glass Bed Upgraded Review.
Ender 3 glass plate has a much smaller CREALITY logo than the older version, avoiding leaving logo indentations on the mold’s surface during 3D printing.
3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts. improved 3D printer glass plate provides a more flat
What You’ll Get to Enjoy This Creality Ender 3 Glass Bed Upgraded Review?
No Edge Curling – 3D printer coated glass bed, molds could stick on bed firmly without glue, avoiding the issue of print edges curling. A necessary 3d printer upgrade parts.
No-indentation Printing – Upgraded Ender 3 glass plate has a much smaller CREALITY logo than the older version, avoiding leaving logo indentations on the mold’s surface during 3D printing.
Excellent Flatness – Improved 3D printer glass plate provides a more flat and more smooth build surface than a magnetic mat or per sticker, ensuring high flatness for the bottom of the model.
Super Convenient – Very easy to take off the model, no tools needed. And cleaned with alcohol or acetone at room temperature.
Compatibility – The 3D printer parts are applicable with Creality 3D printer Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, and CR-20, CR-20 Pro, pls confirm if this borosilicate glass bed is compatible with your printer.
Specifications for this item
- Brand Name: Dawnblade
- Ean: 0745679683719
- Item Shape: Square
- Material: borosilicate glass
- Part Number:L Dawnblade190503
- Specification Met: …………..
- UNSPSC Code: 27110000
- UPC: 745679683719
Advanced 3D Printer Print Bed
Compared with print platforms such as magnetic stickers, per sheet, and spring steel plate, the glass platform has the highest flatness. On this basis, the composite microporous coating is added to greatly enhance. Its performance for getting higher precision mold.
Borosilicate glass is sturdy and durable, has strong heat resistance, withstands multiple times of use, no need for frequent replacement.
Compared with platforms made of other materials, installation and cleaning are simpler, saving your time.
>> Get Creality Ender 3 Glass Bed Upgraded Here >>
As the platform is heating, the micropores expand. At the time, molecules of the filament penetrate into the micropores. So the print will be fix on the surface of the glass bed.
Stop heating as printing is completed, glass bed cools, the micropores shrink. So molecules of the filament are squeezed out of the micropores. And print mold falls off.
- No Edge Curling
- Excellent Flatness
- Easy Removal
- Sturdy and Durable
- Easy Clean
- Convenient Use
Features of Creality Ender 3 Glass Bed Upgraded Review
No Edge Curling
To solve the issue of print edges curling. A composite microporous coating is added to the glass surface. Ensuring that the bottom of. The mold can be firmly attached to the surface of the print platform.
Compared with a magnetic mat or per sticker, the improved 3D printer tempered glass plate provides the flattest (Flatness error range of 0.1 mm) build surface in the market, ensuring high flatness for the bottom of the model.
After the printing is completed, wait for the hotbed to cool down to a suitable time for taking off the mold. Then try to remove the mold, usually no need for other tools such as a shovel.
Sturdy and Durable
Hardness of 8 Mohs, avoiding the deformation of the ordinary aluminum heat bed after long-term use. Heat resistance up to 400 ℃, no deform, ensure the accuracy of mold. Withstand up to 2000 times use, no need of frequent replacement.
Easy to Clean
After multiple uses, wipe with alcohol or acetone. Of course, soap water can also be used to clean glass surface.
It could be fixed with middle-sized clips. Please note that this item only contains one piece of the coated glass plate, but the clips are not included.
About Creality Coated Glass Bed
Bed temperature setting for direct extrusion and Bowden extrusion is similar. It temperature setting for different material filament is as shown. However, please note that bed temperature will vary according to actual conditions.
Higher requirement for print accuracy. Don’t want to spend too much time cleaning the platform. Wish for long-term use. Take off the model more easily and quickly.
A glass bed has high requirements for bed leveling, you may spend more time on leveling. As the requirement of easy taking.
Finally, a glass bed is more suitable for platforms with countersinks. For platforms with through holes, the screws may hit the glass surface and affect bed leveling.
- Clean with alcohol or acetone when it cools down, gently rub the surface, not shovel or scraper.
- Forcibly removing the print from the glass bed at high temperatures will damage the coated side.
- The coated side of the glass bed must come down to room temperature or a bit higher for releasing mold.
- The glass plate is thicker, please lower the platform hotbed to avoid nozzle scraping the glass bed.
- Please remove the plastic protective film from the glass before use.
- Please make sure that the glass fits tightly on the platform during installation.
- Size: 2352354 mm
- Application Range: Ender-3, Ender-3 Pro, Ender-3S, Ender-3X, Ender-3 V2, Ender-5, Ender-5 Pro, CR-20, CR-20 Pro
- Expanded: Other 3D printers using same size (235*235) platform: Voxelab Aquila, Geeetech A10 series, Artillery Genius, BIQU-B1
- Material: Borosilicate Glass
- Technology Type: Composite microporous coating
- Hardness: 8 Mohs
- Heat Resistance: 400 ℃
- Product Category: 3D Printer Accessories
- Clean With: Alcohol/ Acetone/ Soap water
- Package List: 1 * Coated Glass Bed
- Product Dimensions : 9.25 x 9.25 x 0.16 inches; 1.55 Pounds
- Date First Available : May 3, 2019
- Manufacturer : Dawnblade
- ASIN : B07RD6D2ZQ
To use this interesting 3D picture gloss, click on our Amazon link now and purchase. You will get it at home so friends click on the link below and purchase the product at a discount.
Finally, I want to say you can choose Creality Ender 3 Glass Bed Upgraded Review. If you see the overall user opinion then it’s really awesome. Over 995 people ratings this Creality Ender 3 Glass Bed Upgraded as GOOD. Thanks for reading my Creality Ender 3 Glass Bed Upgraded Review.
Thanks, dear readers for reading all the blog posts and for staying with us. I hope you will purchase this beautiful Creality Ender 3 Glass Bed Upgraded Review by selecting the right product and clicking on the link below. Hope everybody on this site also had a great day.