Introduction – DAYBETTER Led Strip Lights Review
Welcome to my DAYBETTER Led Strip Lights Review.
This is an LED Strip light. Which is a beautifully used LED Strip light to keep your house lit and beautifully decorated.
There is a kind of hard glue on the bottom of the light for which you can place it effortlessly wherever you want. You can put it in your home, around the TV, or in the car, on the wall, wherever you want.
The biggest advantage of which is the remote control. It can change the color of your light via remote. You can color as much as you like. You can use everything in your mind.
What You’ll Get to Enjoy This DAYBETTER Led Strip Lights?
Strong self adhesive: The led strip lights has a stronge self adhesive so they stick very well on TVs, cars, cabinets and walls; Please test the led strip lights before installation, every roll lights has one connector to link with controller box. So they should be attached in parallel, not in series.
Colorful and durable: The infrared remote can adjust multiple colors, including rgb, white, 16 other colors and their brightness; With 6 dynamic modes (auto, flash, jump3, jump7, fade3, fade7) and 2 speed modes (quick, slow) by remote, you can make the light strip show varieties of different color changes; Use the DIY buttons to save 6 colors if you like.
Cuttable and linkable: Our 32.8 feet led lights strip have 300 leds, it can be cut every 3 LEDs along the cutting marks if you don’t need such a long lights or you could extral connectors to extend the lights for your bedroom, TV, desk, computer indoor.
Remote contol: You can use the infrared remote control to remotely control the light strip to suit the mood of the room easily; Also you can set it according to different scenes until you are satisfied.
Widely use: The led lights are suitable for bedroom, kitchen, cabinet, car, living room, party or wedding.
>> Get DAYBETTER Led Strip Lights Here >>
Product description All About This Item
LED strip lights kit
32.8Ft Led Strip Lights
- SMD: 5050 300 leds
- Color: RGB
- Voltage: 12 volt
- Length: 2 rolls 16.4feet
- Wide:10mm
44 Keys IR Controller Remote
- Rgb controller box
- 44 keys ir remote
- Control distance: 5meter (must be poniting at the sensor without any obstacles)
5A Adapter
- Input: 100-240 Volt AC 50/60Hz
- Output: DC 12 Volt
- Max Current: 5 Aampere
- Max Wattage: 60 Watts
Installation Guide
Warming tips:
- Please clean the surface before stick on the strip and make sure that the paste is successful by one time, otherwise, the stickiness will become weak after repeated use, and you need to add back glue again
- Please don’t stick the lights to the metal surface that conductive, it may cause a short-circuit on the strip lights
- Don’t let them on the spool when you testing them for more than 2 minutes, they need to dissipating heat
- The ventilation must be ensured. These lights need an excessive amount of airflow for cooling
Connection tips
Please notice to connect the 4pin connectors of the controller box arrow to the positive of lights; If not, it will don’t work.
Test the lights before installation
Please confirm your connection is correct, below is some steps need to notice:
- Connect the 4pin connectors of the controller box arrow to the positive of lights.
- Make sure the lights are connected, and the power light up green bulb.
- Pull out the transparent chip from the button of the IR remote.
- Use the IR remote turn on the lights (IR remote aim at the IR receiver).
DIY function
About DIY function, Please follow the steps below：
Step 1: Turn on the lights. Press one of the RGB buttons. Step 2: Press the DIY1 button (the lights will change to white color for the first time). Step 3: If you need deeper red color, press and hold the red up button(at least 5 seconds), the longer you hold, the deeper red color you have. You can also press green and blue down, the changing will be more clearly. Step 4: Keep the color you just set by pressing the DIY1 button again. Step 5: Repeat the steps above to set the rest of five DIYs.
Strong adhesive
Adhesive is strong and lets you place, such as the back of TV, table, cabinet and window
TIP: the adhesive is very strong so use caution when using it on white walls or unfinished wood
>> Get DAYBETTER Led Strip Lights Here >>
Applications
Used for kitchen, they are stick well on cabinet and wall
Used for living room decoration for backlight, under desk, behind TV
The lights be used for bedroom, ceiling
Product information & Technical Details Of DAYBETTER Led Strip Lights Review
Product information & Technical Details Of DAYBETTER Led Strip Lights Review
Manufacturer: DAYBETTER
Part Number: R5032-RGB
Item Weight: 14.4 ounces
Package Dimensions: 5.94 x 5.31 x 2.44 inches
Item model number: FLSL-R5032-RGB-US
Is Discontinued By Manufacturer: No
Size: 32.8FT
Color: Multicolor
Power Source: Corded Electric
Voltage: 12 Volts
Wattage: 36 watts
Type of Bulb: LED
Special Features: Dimmable
Batteries Included?: No
Batteries Required?: No
ASIN: B07SPZ2HGT
Wattage: 36 watts
Bulb Voltage: 12 volts
Best Customer Review
My wife and I recently had a screened porch converted to a sunroom, and my wife wanted to add some sort of mood/celebratory lighting. After considering a number of options, we found the Daybetter R5032 at a terrific price, and placed an order for one package.
Once we received the R5032 package, and started considering how we could mount the LED strip(s) we decided we would like to mount the light strips in a trough near the ceiling and use them to provide indirect lighting for the room. The two 5 meter LED strips would allow us to place lighting along two walls of the sunroom.
Not being able to decide which two walls should carry the lights, it seemed to make more sense to place the lighting all the way around the room so we considered ordering a second R5032. This would mean that we would have two controllers, and two IR receivers possibly placed in two different locations in the room.
The LED strips come with connectors on both ends making it seem like they could be connected in series, but this is not supported by Daybetter. The controller has two separate leads each of which connects to one of the 5 meter LED strips. Connecting both LED strips in series to one of the controller power leads would burn out the controller.
Continue Reading – DAYBETTER Led Strip Lights Review
In order to place both IR receivers in the same location, but have one of these controllers control lights that were 5 meters away, we needed extension cables that would allow power from one controller to run to a LED strip 5 meters away. I contacted Daybetter customer support to ask if they sold such extension cables.
The next day I received an email that said they did not carry any such cables, but they did provide a link to a company that sold such cables through Amazon, and they were willing to help offset the cost of the cables. Thanks to this quick response, I ordered a second R5032 package from Daybetter, and a set of 4 four-conductor 3 meter extension cables from HUALAND.
Connecting two of the extension cables together gave me enough length to reach an LED strip 5 meters away. The next issue became how to build a trough in which the LED stips could be mounted. I found a solution at my local Lowes where I discovered a vinyl door edge that was a bit larger than the 0.5 inch width and height needed to conceal the LED strip.
Continue Reading – DAYBETTER Led Strip Lights Review
The size was perfect (UnmountedTrough.jpg), and the price was a tenth of what wood trim would cost to cover the same length. Since the trough was vinyl, I needed to insure that the LED strips did not generate enough heat to melt them so I laid out the LED strips and turned them on to full brightness to evaluate the amount of heat generated by the circuitry on the strip.
The heat through the resistors on the LED strip was barely detectable. I painted the door edge trough and installed it at the bottom edge of a 1 x 2 trim piece that already went around the room (Trough+IRsensors.jpg). I ended up installing the LED strip along the back edge of the trough rather than the bottom of the trough because I did not think the horizontally oriented LED strip would bend nicely around 90 degree corners (LEDinTrough.jpg).
Bending a vertically oriented LED strip around the room’s 90 degree corners was no problem. Once the trough and the LED strips were installed, I then needed to place two power packs and two controllers somewhere hopefully out of sight. An attic is directly above the sunroom. So I decided to drill a hole in one corner of the sunroom ceiling. And route the 4 conductor power cables through the hole into the ceiling where the two power packs and the two controllers would be mounted.
Continue Reading – DAYBETTER Led Strip Lights Review
The power pack cords were long enough to allow them to be install almost anywhere convenient in the attic (PowerPacks+Controllers). The two controller modules had to be install right next to the hole in the attic floor. So that the IR receiver cables could pass through the hole and be aimed out to the center of the sunroom (Trough+IRsensors.jpg).
One remote control send a command that is receive by both controllers. So all light strings react in unison. The results are highly satisfactory as. I hope can be seen from some of the included pictures (LEDsunroom1-7.jpg). The light strips provide a wide range of colors at about 5 intensity levels, and the adhesive backing made mounting in the trough super simple. The product works great for us, and the customer support was outstanding.
Final Opinion – DAYBETTER Led Strip Lights Review
Oh, my dear friends, you have read so many times in your review that maybe you have read everything and found out what I have discussed so much about. Yes, friends, this LED light is very necessary for you to make your house look more beautiful to illuminate your daily life. And you can make your home more beautiful by purchasing it.
The rules and efficiency of the use of lights are very nice. Wherever you are you can place it effortlessly in your home and the glue that has been used to keep it for a long time is much stronger. It will not suddenly fall from your userspace.
My dear friends, you can get this LED light in your hand while sitting at home, click on the Amazon link given below and order now. You will get the product at your home right now and without any hassle.
So, I want to say you can choose DAYBETTER Led Strip Lights Review. If you see the overall user opinion then it’s really awesome. Over 21,973 people ratings this DAYBETTER Led Strip Lights as GOOD. Thanks for reading my DAYBETTER Led Strip Lights Review.
Thanks, dear readers for reading all the blog posts and for staying with us. I hope you will purchase this beautiful DAYBETTER Led Strip Lights Review by selecting the right product and clicking on the link below. Hope everybody on this site also had a great day.